Woodstock D2677 User Manual

-17-

The table can be adjusted for height, rotation,

and angle. The W1670 adds the fourth adjust-

ment of table distance from column. 

Note: Table or table support parts are not 

interchangeable between the W1669 and the

W1670 drill presses (see

Figures.27.and.28).

1... Loosen the table lock lever.

2.   Turn the hand crank to raise or lower the 

table.

3.   Tighten the table lock lever.

4.  For the W1670, loosen the table tilt lock

bolt (see

Figure.29); or for the W1669,

loosen the cap screw.

5.   Turn the index pin draw nut clockwise and 

draw the index pin out of the casting until 

you can rotate the table to your desired 

angle (see

Figure.29).

 

 

Note: Use this index pin only for indexing 

the table to the “Zero degree” position. 

 

Note: To index the table back to the zero

position, back off the draw nut, turn the 

table to zero, tap the index pin back into

the casting, and tighten the table tilt lock 

bolt.

6.   Tighten the tilt table lock bolt or cap 

screw, and double check your angle.

Figure.27..W1669 Table support assembly.

Figure.28..W1670 Table support assembly.

Figure.29..Tilt mechanism and lock bolt.

Table-Tilt 

Lock Bolt

(W1670)

or 

Table-Tilt 

Lock Cap

Screw

(W1669)

Index Pin 

and 

 Draw Nut

Tilt 

Scale