Makita BHR243 (LXRH02*1) User Manual

P 21/ 25

• Slide lever B on Housing L 

   Remove Rack B and Compression spring 3 in Housing L as drawn in Fig. 67, and then move Slide lever B toward 

   the upper direction like the arrow mark. (Fig. 67)

• Slide lever A on Slide pipe

  Remove Collector base A (DX01)/ B (DX02) from Slide pipe by releasing the hooks with a thin-slotted screwdriver,

  and then separate Rack A, Compression spring 3, Stopper base and Slide lever A. (Fig. 68) 

DISASSEMBLING

Housing L

Slide lever B

Housing L

1

Slotted screwdriver

Inside of Housing L

Outside of Housing L

(viewed from the opposite)

Compression spring 3

Rack B

Arrow mark

on Slide lever B

Hooks to set in the holes

on sides of Slide pipe 

2

3

Collector

base A/ B

Slide pipe

Stopper base

Slide lever A

Note: Remove Rack A, Compression spring 3 and Slide lever A

          in the same way as mentioned in Fig. 67.

Rack A

Compression spring 3