Yamaha 4-axis model User Manual

9-9

Chapter 9 MXYX

3-2

Moving arm type 2-axis model

For the moving arm type, an aluminum bracket is attached to the end of the
Y-axis. Install the tool on this bracket.
Twelve M6 coarse thread tap holes and two

φ6 reamer holes are opened on the

bracket.

Fig. 9-10 Moving arm type

CAUTION

If the fitting length is less than 9mm, the threads could be damaged during
tightening. If the length of the bolt screw is 30mm or more from the installation
surface, the screw could contact the Y-axis.

Select the minimum fixing bolt screw length so that the screw fitting length is
9mm or more.

oler

ance betw

een knoc

k (0.02)

12-M6

×1.0

130

110

100

φ6H7 Depth6