Brother BAS-300G Owner's Manual

3. INSTALLATION 

 

BAS-300G, BAS-311G, BAS-326G 

3

Machine installation should only be carried out by a 
qualified technician. 

Contact your Brother dealer or a qualified electrician 
for any electrical work that may need to be done. 

The sewing machine head weighs approximately 
88kg. The installation should be carried out by two or 
more people. 

Do not connect the power cord until installation is 
complete. 
If the foot switch is depressed by mistake, the sewing 
machine might start operating and injury could result. 

Hold the machine head with both hands when tilting it 
back or returning it to its original position. 
Furthermore, do not apply excessive force when tilting 
back the machine head. The sewing machine may 
become unbalanced and fall down, and serious injury 
or damage to the sewing machine may result. 

All cords should be secured at least 25 mm away from 
any moving parts. Furthermore, do not excessively 
bend the cords or secure them too firmly staples, 
otherwise there is the danger that fire or electric 
shocks could occur. 

Be sure to connect the ground. If the ground 
connection is not secure, you run a high risk of 
receiving a serious electric shock, and problems with 
correct operation may also occur. 

Install the safety covers to the machine head and 
motor.