Brother BAS-300G Owner's Manual

 

 

27

BAS-300G, BAS-311G, BAS-326G 

Refer to "5-8. Notes on handling CF cards (sold separately)" for details on using CF cards. 

 
 
 
 
 
 
 
 
 
 
 
 
 

With the power turned off, insert the CF card into the CF 
slot.

 

• 

Make sure the CF card is facing the correct way 
when inserting it.

 

• Always be sure to keep the cover closed except 

when inserting and removing the CF card. If this is 
not done, dust may get inside and cause problems 
with operation. 

 

 
 
 
 
 
 
 
 
 
 
 
 

CF media indicator illuminates

Turn on the power switch.

 

Press the 

 or   

key to select the program number 

(100 

− 999).

 

* The "---" display is used to check the feed home 

position. 

 
 
 
 
 
 
 
 
 

Loading

Press the R/W key.

 

 
 
 
 

• The buzzer will sound and the selected sewing data 

will be loaded from the CF card and copied into the 
sewing machine's internal memory. 

Loading complete 
The PROGRAM No. display will change from "    P" to the selected program number. 
Turn off the power switch, remove the CF card, and then close the cover of the CF slot.

 

1. Press the   or    key (1) to select the program number 

that is loaded into the internal memory. 
•  The program number will flash in the PROGRAM No. 

display (2). 

•  "---" will appear at the time of shipment from the 

factory. (For checking feed home position) 

2.  Depress the foot switch to the 2nd step. 

(If using a two-pedal foot switch, lower the work clamp 
before depressing the start switch.) 
•  The feed mechanism will move to the home position 

and the program number will be accepted. 

•  The program number will stop flashing and illuminate 

steadily. 

After completing the setting, be sure to refer to "5-6. 
Checking the sewing pattern" to check that the needle 
drop position is correct. 

4954Q

2nd step 

4457Q

4421Q

4453Q

4498Q