Allied Telesis AT-FS238A/1 User Manual
13
Chapter 2
Installing the Bridging Converter
This chapter explains how to install an AT-FS238a/x and AT-FS238b/x Series
Bridging Converters. These bridging converters can be installed on a desktop
or in an AT-MCR12 chassis.
Bridging Converters. These bridging converters can be installed on a desktop
or in an AT-MCR12 chassis.
Verifying Package Contents
Make sure the following items are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales representative for
assistance.
missing or damaged, contact your Allied Telesyn sales representative for
assistance.
❑
One AT-FS238a/x or AT-FS238b/x Series Bridging Converter
❑
Four protective feet (for desktop use only)
❑
Optional power supply (depending on the model)
❑
Optional power connector
❑
This installation guide
❑
Warranty card
Note
For information on the power supplies used with the AT-FS238a/x or
AT-FS238b/x Series Bridging Converter, refer to “External Power
Supply” on page 3.
For information on the power supplies used with the AT-FS238a/x or
AT-FS238b/x Series Bridging Converter, refer to “External Power
Supply” on page 3.