Vicks PS-3K User Manual
General information
1-1
R
1
General information
1.1 The following should be principally observed ...
With this Stud Welding Pistol you have purchased a product which
• corresponds to the latest state-of-the-art in technology
• complies fully to the present-day safety standards and
• enables successful operating.
• complies fully to the present-day safety standards and
• enables successful operating.
Please observe the following points in any case before installing the Stud
Welding Pistol:
Welding Pistol:
• Store the Operating Instructions in a place to which every Operator has
access.
• Ensure that the respective Operator has read and understood the Operating
Instructions before installation. Each Operator should sign a written
confirmation to certify this.
confirmation to certify this.
• Prevent use of Stud Welder by unauthorised personnel.
• An electronics technician should check whether the electric supply is
• An electronics technician should check whether the electric supply is
properly protected by fuse and earthed.
• Only trained personnel may use the Stud Welding Pistol.
MORTAL DANGER
Persons with cardiac pacemakers must not operate the Stud Welder and
must keep away from a Stud Welder during operation. Ensure in particular
that the Stud Welding System is not operated near electronically sensitive
life-saving equipment, as in intensive wards in hospitals.
must keep away from a Stud Welder during operation. Ensure in particular
that the Stud Welding System is not operated near electronically sensitive
life-saving equipment, as in intensive wards in hospitals.
WARNING
Ensure that sufficient distance to electronic equipment is kept. Highly
intensive electro-magnetic fields are created in stud welding which may
permanently damage these devices (e.g. television sets).
Ensure that sufficient distance to electronic equipment is kept. Highly
intensive electro-magnetic fields are created in stud welding which may
permanently damage these devices (e.g. television sets).
• Furthermore, observe the safety instructions stated in Chapter 3.
• Call a doctor in the event of an accident.
• Call a doctor in the event of an accident.
MORTAL DANGER
The S-symbol is the symbol for welding current sources permitted
for operation with increased electric danger. The S-symbol on our stud
welders refers exclusively to the welding current circuit and not to the
complete stud welder.
for operation with increased electric danger. The S-symbol on our stud
welders refers exclusively to the welding current circuit and not to the
complete stud welder.