Agilent Technologies 3138A-00101 and above User Manual
Connections 21
3
Connections
Rear Panel
Figure 3-1 shows where all of the rear panel connections to the mainframe are made.
Figure 3-1. Rear Panel Connections
Module Connections
Wire connections to the modules are made using a separate module connector that is supplied with each module. After the
module connector has been wired, it simply attaches to the back of the mainframe. You can attach the module connector to
the mainframe either before or after the module is installed. Instructions for wiring and attaching the connector are provided
with each module.
module connector has been wired, it simply attaches to the back of the mainframe. You can attach the module connector to
the mainframe either before or after the module is installed. Instructions for wiring and attaching the connector are provided
with each module.
Note
Install the module connectors from left to right on the back of the mainframe. This makes it easier to
access the screws that attach the connectors to the mainframe.