IBM 9077 User Manual
Installation and Configuration
86
• The SP Switch Router card connected to port J31 of SP Switch A2 is node
number 25.
• The SP Switch Router card connected to port J31 of SP Switch A3 is node
number 41.
• The SP Switch Router card connected to port J15 of SP Switch A1 is node
number 16.
Figure 34. How Frames Enable Connections to Multiple SP Switches
3.7 Step-by-Step Media Card Configuration
This section provides a configuration overview and the steps required to
configure an SP Switch Router Adapter media card.
configure an SP Switch Router Adapter media card.
3.7.1 Configuration Files and Their Uses
These are the configuration files found in /etc on the SP Switch Router,
discussed in this chapter:
discussed in this chapter:
• grifconfig.conf - identifies each logical interface on a media card
• snmpd.conf - enables SNMP capabilities
• grdev1.conf - configures SP Switch Router Adapter cards
Refer to
GRF Reference Guide 1.4
, GA22-7367 for templates of all
configuration files.
Frame 1
Frame 3
Frame 2
J7
J31
J15
J23
SP Switch A1
J7
J31
J15
J23
SP Switch A2
J7
J31
J15
J23
SP Switch A3
SP Switch Router
gt000
Node 9
Node 9
gt030
Node 41
Node 41
gt020
Node 25
Node 25
gt010
Node 16
Node 16
SP system A