PSC 7000 User Manual

Getting Started

Connect the scanner to the appro-

priated port on the terminal/PC using the correct cable for the interface 
type you ordered. Reference 

.

Connect the scanner to the IBM port on the ter-

minal/PC using the correct IBM cable. Reference 

.

The Keyboard Wedge cable has a 

‘Y’ connection from the scanner. Connect the female to the male end 
from the keyboard and the remaining end at the keyboard port at the 
terminal/PC. Reference 

The scanner is typically factory-configured with a set of default features 
standard to the interface type you ordered. After scanning the interface 
bar code from the 

 section, you can select other 

options and customize your scanner through use of the instructions and 
programming bar codes available in that section and also the 

 chapters of this manual.

If you aren’t sure what programming options are in your scanner, or 
you’ve changed some options and want the factory settings restored, scan 
the Standard Product Default Settings bar code below. This will copy the 
factory configuration for the currently active interface to the current 
configuration.

The programming section lists the factory default settings for each of the 
menu commands (indicated by shaded blocks and bold text) on the fol-
lowing pages.

Standard Product Default Settings