Weber Burner Tube Replacement Instructions Instruction Manual
1
Burner Tube Replacement Instructions
55355 07/31/02
WARNING: BEFORE STARTING, TURN THE GAS OFF AT THE GAS SUPPLY, DISCONNECT
THE GAS SUPPLY AND CAREFULLY READ THESE INSTRUCTIONS BEFORE REPLACING THE
MAIN BURNERS.
THE GAS SUPPLY AND CAREFULLY READ THESE INSTRUCTIONS BEFORE REPLACING THE
MAIN BURNERS.
STEP 2
Remove the Control Panel and burner control knobs
Be sure gas is turned off at source.
Remove control panel and burner control knobs
You will need: Phillips screwdriver.
1) Remove control knobs.
2) Remove screws through slots in trim with a Phillips
1) Remove control knobs.
2) Remove screws through slots in trim with a Phillips
screwdriver.
3) Pull up igniter button until it sticks in the up position and
remove control panel from grill.
*If you have a different style grill, put your fingers under
the edge of the control panel at the control panel push-
in buttons and pull toward you.
*If you have a different style grill, put your fingers under
the edge of the control panel at the control panel push-
in buttons and pull toward you.
(3)
(2)
(1)
*The grill illustrated may have slight
differences than the model purchased
Control panel
push-in buttons
Hole in the
frame brace
frame brace
(2)
*If you have a different style grill
there will be push buttons
to remove instead of screws
STEP 1
Remove the Manifold and Valve Assembly
Unhook the manifold bracket(1) and unscrew the two nuts(2)
that hold the manifold to the cooking box. Pull the manifold
assembly out of the burners and carefully set it down.
that hold the manifold to the cooking box. Pull the manifold
assembly out of the burners and carefully set it down.
(2)
(1)
Frame Brace
Cookbox
Manifold Valve Assembly
*The grill illustrated may have slight differences than
the model purchased
STEP 3
Remove the Cooking Grates and Flavorizer
®
Bars
Your Weber Gas Barbecue must be OFF and cool.