Fujitsu C150-e100-01EN User Manual

 1-6

 

Button

Next

LCD displays the next screen.

Previous

LCD displays the Previous screen.

←

Moves the cursor to the left

→

Moves the cursor to the right

Exit

• When “CHECK” LED lights, pressing this button releases error status (turn

off “CHECK” and returns to “Scanner Readry” screen).

• When you are setting on the operator panel, pressing this button returns to

“Scanner Ready” screen immediately.

ENTER

The parameter selected by cursor becomes effective.

(START)

When Manual start mode is set or “READ” lamp lights, this button is effective

and starts the reading.

(STOP)

This button is effective during reading operation and stops the reading.

LED

Indicates that the scanner is ON.

READ

Indicates that the scanner is reading or ready to read.

CHECK

• If it lights, it means that some alarm occurred. Pressing “Exit” button turns

off “CHECK” lamp.

• If it blinks at one second cycle, it means that jam or double feed is

detected. Removing the jammed paper turns off “CHECK” lamp. At double

feed, pressing “Exit” button turns off “CHECK” lamp.

• If it blinks at four seconds cycle, it means that ADF cleaning is necessary.