Fujitsu DL7400 User Manual

This

 reset the printer’s power-on defaults, all of 

the facto
MENU2

ower-on defaults are the settings saved in the printer’s permanent 

memory. The defaults are enabled whenever you turn the printer on. 

and then on again. This method is useful if you have made changes in 

tup mode that you do not want to save. 

Factory 
the print
Options 
function

2. 

h

 printer beeps. 

e.  

 DEFAULT. 

This

 defaults for MENU1 and MENU2 options, 

liste

oes not reset the printer hardware, print position 

n 

 section describes how to

ry defaults, or the factory defaults only for MENU1 and 

. 

P

The easiest way to reset the power-on defaults is to turn the printer off 

se

defaults are those settings preselected at the factory. For a list of 

er’s factory defaults, see the section Printing a List of Selected 

earlier in this chapter. To reset the factory defaults for all 

s, proceed as follows: 

1.  Turn off the printer. 

W ile pressing the LOAD and, TEAR OFF buttons, turn on the 
printer. Continue to press the two buttons until the

The factory defaults are now reset. 

Another available method is to select INITIAL in SETUP mod
The method of making settings is the same as the method for 
selecting DEFAULT on the next page, except that INITIAL 
must be selected instead of

 method resets factory

d in Table 5.3, but d

adjustment, and configuration options. To reset the factory defaults i
MENU1 and MENU2, proceed as follows: