Lexmark 560n User Manual
Setting the copy margins
Note: The ADF cannot be used for this feature.
1
From the printer control panel, press System.
2
Press
or
repeatedly until Default Settings appears, and then press OK.
3
Press
or
repeatedly until Copy Defaults appears, and then press OK.
4
Press
or
repeatedly until Margin Width appears, and then press OK.
5
Press
or
repeatedly to select the margin you would like to change, and then press OK.
6
Press
or
repeatedly to adjust the margin, and then press OK.
7
Repeat the steps for other margins, and then press
repeatedly until Select Function appears.
8
Load an original document facedown on the scanner glass.
9
From the printer control panel, press Copy.
10
Use the keypad to enter the number of copies.
11
To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose
between B&W (black and white) and Color.
between B&W (black and white) and Color.
12
Press
or
repeatedly until Margin appears, and then press OK.
13
Press
or
repeatedly until On appears, and then press OK.
14
Press Start
to begin copying.
Canceling a copy job
To cancel a print job, press Stop
at any time.
Note: If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before
the stop command was sent. Canceling appears on the display, and the remaining buffered pages are printed
before the job is canceled.
the stop command was sent. Canceling appears on the display, and the remaining buffered pages are printed
before the job is canceled.
Copying
69