KYOCERA 2560 User Manual

6-1

If trouble occurs with this machine, carry out the items indicated below. If the trouble persists, 
contact your service representative.

Nothing is displayed on the 
operation panel when the 
main power switch is 
turned on.

Is the power plug connected to an AC 
outlet?

Connect the plug to an AC outlet.

No copies come out when 
the Start key is pressed.

Is there any indication of the trouble on 
the operation panel?

Check the appropriate measures 
against that indication and carry out the 
corresponding procedure.

The copies come out 
blank.

Were the originals set correctly?

When setting originals on the platen, 
set them face-down along the original 
size indicator plates.

When setting originals in the optional 
document processor, set them face-up.

The copies come out too 
light.

Is the auto exposure adjustment mode 
set?

To adjust the overall exposure level, 
perform the auto exposure adjustment 
procedure.

Refer to 
Chapter 3 in 
Advanced 
Operation 
Guide.

Is the manual exposure mode set?

Use the Lighter key or the Darker key 
to adjust the exposure level properly.

To adjust the overall exposure, perform 
the relevant exposure adjustment 
procedure in each image quality mode.

Refer to 
Chapter 3 in 
Advanced 
Operation 
Guide.

Is the toner evenly distributed in the 
toner container?

Shake the toner container horizontally 
approximately 10 times.

Is the ecoprint mode set?

Do not set the ecoprint mode.

Refer to 
Chapter 1 in 
Advanced 
Operation 
Guide.

Is Add Toner displayed?

Replace the toner container.

Is the copy paper wet?

Replace the copy paper with new paper.

Is the electrical charge section dirty?

Open the front cover and use the 
charger cleaner rod to clean the 
electrical charge section.