KYOCERA 3050ci User Manual

4

When two or three OHP transparencies are stacked on top of each other, static electricity may make them 
difficult to handle. When using OHP Backing Sheet, a paper sheet is automatically inserted between each 
transparency, making them easier to handle. Also, the same original page can be copied to the backing sheet 
for multiple page copying.

For transparency film that can be used, refer to Transparencies on page Appendix-18.

Never load OHP transparencies into trays or cassettes other than the multi purpose tray.
When OHP Backing Sheet is set, the multi purpose tray paper type is automatically set to Transparency.
If the optional document finisher is installed, you may need to specify the output destination for finished copies. 
For further details, refer to Paper Output on page 4-13.

Outputs a blank backing sheet after copying to a 
transparency. (* denotes OHP film.)

After copying to a transparency, copies the same 
original image to the backing sheet paper. (* denotes 
OHP film.)

Follow the steps below for OHP Backing Sheet.

Press the Copy key.

Place the original.

Load the transparencies into the multi purpose tray.

Fan through the transparencies before 

loading.
Up to 10 transparencies can be loaded at one time.
Be sure that paper of the same size and orientation as 
the transparencies is loaded in the cassette.

3

*

3

2

1

2

*

1

*

Original

Copy 

3

3

*

3

2

1

2

2

*

1

1

*

Original

Copy