KYOCERA 3050ci User Manual

2

To activate Low Power Mode, press the Energy Saver 
key. Touch panel and all indicators on the operation 
panel will go out to save power except the Energy 
Saver, Power, and main power indicators. This status 
is referred to as Low Power Mode.

If print data is received during Low Power Mode, the 
machine automatically wakes up and starts printing.
Also when fax data arrives while the machine is in Low 
Power Mode when using the optional fax, the machine 
automatically wakes up and starts printing.

To resume, perform one of the following actions. The 
30/30 ppm or 35/35 ppm model will be ready to operate 
within 15 seconds, or the 45/45 ppm or 55/50 ppm 
model will be ready within 20 seconds.

• Press any key on the operation panel.
• Open the platen cover or the optional document 

processor.

• Place originals in the optional document processor.

Note that ambient environmental conditions, such as 
ventilation, may cause the machine to respond more 
slowly.

Auto Low Power Mode automatically switches the machine into Low Power Mode if left idle for a preset time. 
The default preset time is 3 minutes (for the 30/30 ppm, 35/35 ppm, or 45/45 ppm model) or 5 minutes (for the 
55/50 ppm model).