HP (Hewlett-Packard) A440 User Manual

To print photos you have taken with the camera, dock the camera on the printer. Dock
the camera only when it is turned OFF.

Do not attempt to dock an incompatible camera on the printer. Docking

an incompatible camera could damage the connector. Go to 

 for

a list of compatible HP cameras for the printer.

Do not undock the camera while printing. If you undock the camera while

printing, all print jobs are cancelled.

You can also connect a PictBridge-certified camera to the camera port on

the front of the printer using the USB cable that came with the camera. However, you
cannot connect another camera if the HP Photosmart A440 series camera is already
docked on the printer. See the camera user guide for more information on how to use
this feature.

To dock the camera on the printer
1. Open the camera dock cover, if necessary.
2. Hold the camera so the camera image display faces you and the bottom of the camera

is down.

3. Make sure the camera is turned off.
4. Press the camera into the dock so that the connector tab in the camera dock plugs

into the connector slot on the bottom of the camera.

5. In most cases, docking the camera turns on both the printer and the camera. If it does

not, press On on the printer control panel.

While the camera is docked, the camera image display dims after eight

minutes of inactivity, and turns off after ten minutes. The camera image display turns
back on if you send a print job from a connected computer,or if you press any button
on the printer.

Chapter 2

10

HP Photosmart A440 series