HP (Hewlett-Packard) CE538A#BGJ User Manual

 

When printing pages that will be stored for a long time,
this option sets the product to a mode that reduces
toner smearing and dusting.

The default setting is Off.

 

 

Displays the current firmware date code.

 

 

Sets all settings to the factory default values.

Automatic automatically configures all the TCP/IP settings via
DHCP, BootP or AutoIP.

Manual requires you to manually configure the IP address, subnet
mask, and default gateway.

The control panel prompts you to specify values for each address
section. Use the arrow buttons to increase or decrease the value.
Press the 

OK

 button to accept the value and move the cursor to

the next field.

As each address is completed, the product prompts for address
confirmation before moving to the next one. After all three
addresses are set, the product automatically restarts.

Sets the auto crossover function.

Sets whether the product will use either IPv4 or IPv6 protocol.

Sets whether the product displays the IP address on the control
panel.

Sets the link speed manually if needed.

After setting the link speed, the product automatically restarts.

 

Resets all network configurations to their factory defaults.

ENWW

Setup menu

17