Lanier 5455 User Manual
Cleaning
8 - 14
Service and Supplies
Cleaning
Cleaning the Machine
Wipe the copier with a soft, damp cloth and then dry it.
Note: Do not use chemical cleaner or organic solvent, such as thinner or benzene.
If they get into the copier of melt plastic parts, a failure might occur.
If they get into the copier of melt plastic parts, a failure might occur.
Do not clean parts other than those specified in this Operator Guide. Such parts
should be cleaned by your service representative.
should be cleaned by your service representative.
Cleaning the Exposure Glass
Clean the Exposure Glass using a clean dry
cloth.
cloth.
Cleaning the Document Feeder
Clean the Document Feeder Belt using a dry
clean cloth.
clean cloth.
A dirty Exposure Glass or Document Feeder Belt may have an effect on the quality of your
copies. Inspect them and clean as necessary.
copies. Inspect them and clean as necessary.