Ricoh 450e User Manual

User Tools (Copy Features)

148

09. Slip Sheet Tray

You can select a special tray for slip sheets.

❒ Default:

• Machine with bypass tray: Bypass

• Machine without bypass tray: None

10. Duplex Priority

You can choose the default Duplex setting immediately af-
ter power on or when the machine is reset.

❒ Default: 1-Sided 

→

11. Auto Reset

The machine returns to its initial condition automatically 
after your job is finished. The time can be set from 10 to 180 
seconds.

❒ Default: 60 seconds

12. Density Pattern

You can customize the seven image density levels to make 
them darker or lighter.

13. Initial Mode Set

You can select the standard mode or program No.10 as the 
mode to be set when modes are cleared, the machine is re-
set, or immediately after the operation switch is turned on.

❒ Default: Initial

14. Management Setting

You can change settings for user access limitation for copier functions.

Counter Reset

You can check the number of copies made under each user 
code. You can also reset each user code's counter to 0.

❒ If more than one user code is registered, you can view all 

the counters using the 

↑

 or 

↓

 key.

Clear Code/Counter

You can delete all user codes or reset all counters to 0.