Muratec F-112 User Manual
B
ASIC
F
UNCTIONS
2.11
2
3
Open the rear cover to use the rear output slot.
CAUTION
:
• The fusing area inside the rear part of your machine becomes hot once the
machine is turned on. Be careful when you access this area.
4
After copying, close the rear cover.
Setting the Paper Type and Size for the Manual Feeder
After loading paper in the manual feeder, you need to set the correct paper
type and size using the control panel buttons.
type and size using the control panel buttons.
To set the paper size for the manual feeder:
1
Press Menu.
The display shows “Paper Setting” on the top line and the first item,
“Paper Type,” on the bottom line.
“Paper Type,” on the bottom line.
2
Press Enter to access the menu item.
3
Use the scroll button (¥ or ) to find the paper type you are using and
press Enter to save it.
press Enter to save it.
4
Press the button to scroll to “Paper Size” and press Enter to access
the menu item.
the menu item.
N
OTE
: If you are using envelopes or card stocks, you don’t need to set the
paper size.
5
Use the scroll button (¥ or ) to display “Manual Feed” on the bottom
line. Press Enter to access the menu item.
line. Press Enter to access the menu item.
6
Use the scroll button (¥ or ) to find the paper size you are using and
press Enter to save it.
press Enter to save it.
7
To return to Standby mode, press Stop/Clear.