Muratec F-112 User Manual

B

ASIC

 F

UNCTIONS

Copy options, including darkness, original type, copy size and number of 
copies, can be set to the most frequently used modes. When you copy a 
document, the default settings are used unless they are changed by using 
the corresponding buttons on the control panel.

To create your own default settings:

Press Menu on the control panel until “Copy Setup” appears on the top 
line of the display. 

The first menu item, “Default-Change,” appears on the bottom line.

Press Enter to access the menu item. The first setup option, 
“Darkness,” appears on the bottom line.

Press the scroll button (¥ or Š) to scroll through the setup options.

When the option you want to set appears, press Enter to access the 
option.

Change the setting using the scroll button (¥ or Š) or enter the value 
using the number keypad.

Press Enter to save the selection.

Repeat steps 3 through 6, as needed.

To return to Standby mode, press Stop/Clear.

: While you set copy options, pressing 

 cancels the changed 

settings and restores their default status.

You can set the time the machine waits before it restores the default copy 
settings, if you do not start copying after changing them on the control 
panel.

Press Menu on the control panel until “Copy Setup” appears on the top 
line of the display. 

Press the scroll button (¥ or Š) to display “Timeout” on the bottom 
line.

Press Enter to access the menu item.

Press the scroll button (¥ or Š) until the status you want appears on 
the display.

You can select from 15, 30, 60 and 180 (seconds). Selecting “Off” 
means that the machine does not restore the default settings until you 
press Start Copy/Fax to start copying, or Stop/Clear to cancel.

Press Enter to save the selection.

To return to Standby mode, press Stop/Clear.