Muratec F-112 User Manual

A

DDITIONAL

 F

EATURES

Your machine can print reports containing useful information. The following 
reports are available: 

This list shows all of the numbers currently stored in the machine’s memory 
as speed dial and group dial numbers. 

You can print this Phonebook list using the Phone Book button; see 
page 2.20.

This report shows information of the faxes you recently sent. 

This report shows information of the faxes you recently received. 

This list shows the status of the user-selectable options. You may print this 
list to confirm your changes after changing any settings. 

This list shows the document currently stored for Delayed faxes or Toll Save 
faxes. The list shows the starting time and type of operation. 

This report shows the fax number, the number of pages, the elapsed time 
of the job, the communication mode, and the communication results.

You can set up your machine to automatically print the message 
confirmation report after each fax job. See page 1.20.

This list shows up to 10 fax numbers specified as the junk fax numbers by 
using the Junk Fax Setup menu; see page 4.5. When the Junk Fax Barrier 
feature is turned on, incoming faxes from those numbers are blocked.

This feature recognize the last 6 digits of the fax number set as a remote 
fax machine’s ID.

This report is printed automatically after sending documents from more 
than one location. 

This report is printed out automatically when power is restored after a 
power failure, if there occurs any data loss due to the power failure. 

: The lists you have set to print out automatically don’t print out when 

there is no paper loaded or a paper jam has occurred.