Ricoh 1013 User Manual
Basic Functions
23
2
Basic Functions
Note
❒ You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See p.56 “Settings You
Can Change with the User Tools”.
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See p.56 “Settings You
Can Change with the User Tools”.
❒ You can change default settings for
basic functions. See p.56 “Settings
You Can Change with the User
Tools”.
You Can Change with the User
Tools”.
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
If you require darker or lighter cop-
ies, adjust the image density yourself.
ty to match your originals.
If you require darker or lighter cop-
ies, adjust the image density yourself.
AAAA
Press the
{{{{Lighter}}}} or {{{{Darker}}}} key
to adjust the image density.
Selecting an Original Type
There are two ways to match your
originals:
originals:
❖
❖
❖
❖ Text
If you do not select either mode,
your originals will be scanned
with the settings suitable for text
originals with this mode.
your originals will be scanned
with the settings suitable for text
originals with this mode.
❖
❖
❖
❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
pictures can be reproduced with
this mode.
Note
❒ You can change the detailed set-
tings for Text and Photo each with
the User Tools. See p.56 “Settings
You Can Change with the User
Tools”.
the User Tools. See p.56 “Settings
You Can Change with the User
Tools”.
AAAA
Press the
{{{{Original}}}} key, and then
select the original type.
Note
❒ Press the {{{{Original}}}} key to step
through the following types:
Upper indicator lit Text
Lower indicator lit Photo
StellaC-AE-CopyF_V4_FM.book Page 23 Wednesday, July 4, 2001 11:21 AM