Sharp MXC250 User Manual

If one of the following messages appears in the display, take prompt action as instructed by the message.

< >: Tray number
<

>: Size of paper that should be loaded

T

e

le

pho

ne

→ Set the speaker volume to "middle" or "high".

→ Set the ringer volume to "low", "middle", or "high".

→ Check the connections.

Maintenance

It is time for regular maintenance. Contact your SHARP Service 
Department.

Maintenance required. Call for 

service.

Maintenance required soon. Contact your SHARP Service Department.

Call for service. 

–

Turn off the power and then turn it back on. If this does not clear the 
message, write down the 2-digit main code and 2-digit sub-code 
("

-

"), turn off the power, and promptly contact your SHARP Service 

Department.

Obtain replacement toner.

The toner cartridge must be replaced soon.

Check the toner cartridge.

Check to see if the toner cartridge has been installed properly.

Take out toner cartridge and shake it 
up and down.
Reinstall it and close the front cover.

Remove the toner cartridge as explained in "REPLACING THE TONER 
CARTRIDGE" (p.160), shake it, and then reinstall.

Replace waste box.

Replace the toner collection container as explained in "REPLACING THE 
TONER COLLECTION CONTAINER" (p.161).

Change the toner cartridge.

Replace the toner cartridge as explained in "REPLACING THE TONER 
CARTRIDGE" (p.160).

Remove paper from the center 

tray.

The number of sheets in the output tray has reached the limit. Remove the 
paper.

Load <

> paper into tray < >.

The paper size specified for the tray is different from the actual size.
(p.22)