Sharp MXC250 User Manual
27
COPY FUNCTIONS
PLACING THE ORIGINAL
Place the original on the document glass.
Open the document feeder
and place the original face
down on the document glass.
and place the original face
down on the document glass.
Align the upper left-hand corner of the original with
the tip of the
the tip of the
mark.
* An original up to 8-1/2" x 11" (A4) can be placed
on the document glass.
Copying books or originals with folds or
creases
creases
Press down on the document feeder while copying
as shown. If the document feeder is not completely
closed, shadows may appear on the copy or it may
be fuzzy. Straighten originals with folds or creases
well before placing.
as shown. If the document feeder is not completely
closed, shadows may appear on the copy or it may
be fuzzy. Straighten originals with folds or creases
well before placing.
Place the original in the automatic document feeder.
Open the extension tray in
the original exit, and open
the original feeder tray.
the original exit, and open
the original feeder tray.
Adjust the original guides
to the size of the
original(s).
Set the original(s) face up
in the feeding roller tray.
to the size of the
original(s).
Set the original(s) face up
in the feeding roller tray.
Models with the one-sided scanning function
Set the originals face up in the document feeder tray.
Use the peep hole (see
the illustration at right) to
check the position of the
original.
There is an original top
edge mark
the illustration at right) to
check the position of the
original.
There is an original top
edge mark
in the peep
hole. Align the top edge of
the original with this mark.
the original with this mark.
Originals that can be used in the document feeder
Originals that are 5-1/2" x 8-1/2" to 8-1/2" x 14" (A5
to A4) and 15 lbs. to 24 lbs. (50 g/m
to A4) and 15 lbs. to 24 lbs. (50 g/m
2
to 105 g/m
2
)
can be used. A maximum of 50 pages can be
placed at once.
• Models with the two-sided scanning function
placed at once.
• Models with the two-sided scanning function
A maximum of 50 page can be placed at once
• Models with the one-sided scanning function
A maximum of 35 page can be placed at once
Originals that cannot be used in the
document feeder
document feeder
The following originals cannot be used. These may
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent or
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent or
translucent paper, and photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Original with filing holes other than 2 holes, 3 holes,
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Original with filing holes other than 2 holes, 3 holes,
4 holes, or 4-hole wide.
• Originals printed using an ink ribbon (thermal
transfer printing), originals on thermal transfer paper.
• Close the automatic document feeder
slowly. Abruptly closing the automatic
document feeder may damage it.
document feeder may damage it.
• Take care that your fingers are not
pinched when closing the automatic
document feeder.
document feeder.
• Do not press hard on the automatic
document feeder. This may cause failure.
8-1/2" x 11" (A4)
5-1/2" x 8-1/2" (A5)
Note
Original Guides
• Make sure that there are no paper clips or
staples on the original.
• Straighten curled originals before placing
them in the document feeder tray. Curled
original may cause misfeeds.
original may cause misfeeds.
• When you set multiple sheets of thick
original, if the original is not fed, reduce
the number of the set originals.
the number of the set originals.
Peep hole
Note