Ricoh 1013F User Manual
Troubleshooting
50
3
DDDD
While pressing the release lever,
adjust the side fences.
adjust the side fences.
EEEE
Push the metal plate down, and
then square the paper and load it
in the tray.
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
tray, or misfeeds might occur.
Note
❒ Shuffle the paper before loading
it in the tray.
FFFF
Adjust the side and back fences to
the new paper size.
the new paper size.
Important
❒ When loading small quantities
of copy paper, be careful not to
squeeze in the side fence too
much or paper will not be fed
properly.
squeeze in the side fence too
much or paper will not be fed
properly.
GGGG
Push the paper tray in until it
stops.
stops.
Note
❒ Select the new paper size with
the User Tools. See p.51 “Select-
ing the Paper Size with the User
Tools”.
ing the Paper Size with the User
Tools”.
StellaC-AE-CopyF_V4_FM.book Page 50 Wednesday, July 4, 2001 11:21 AM