Grizzly G9749 User Manual
-22-
G9749 Variable Speed Drill Press
2. Unlock the table by rotating the lock lever
clockwise.
3. The table can now be adjusted:
— Vertically by using the table crank handle
(see
Figure 19).
— Horizontally by manually rotating the
assembly around the center column.
4. When you have the table in the desired posi-
tion, use the lock lever to keep in place.
Table Adjustments
The table can be raised/lowered and rotated 360º
around the column.
around the column.
To adjust table height and rotation:
1. Make sure the table lock lever is mounted on
the locking nut as shown in
Figure 19.
The headstock can be adjusted 360º around the
column.
column.
To rotate the headstock:
Note: Make sure the drill press is properly
bolted to the floor before doing this proce-
dure.
bolted to the floor before doing this proce-
dure.
1. UNPLUG THE DRILL PRESS!
2. Rotate the two headstock lock levers counter-
clockwise to loosen them (see
Figure 20).
3. Rotate the headstock to the desired position
and use the lock levers to secure the head-
stock in place.
stock in place.
Headstock Rotation
Figure 19. Table crank handle and lock lever.
Center
Column
Lock
Lever
Crank
Handle
Figure 20. Headstock lock levers.
Lock Levers