Olivetti 2301 User Manual

Page of 107
17
BEFORE USING THE MACHINE
1
LOADING PAPER
Make sure that the machine is not copying, printing, or printing a received fax, and then follow these steps to load paper.
Loading the paper in the paper tray
1
Pull out the paper tray until it stops.
If you are loading the 
same size of paper as 
was loaded previously, 
go to step 4. If you are 
loading a different size of 
paper, continue with the 
following step.
2
Squeeze the lock lever of the front 
guide and slide the front guide to 
match the width of the paper.
3
Move the left guide to the appropriate 
slot as marked on the tray.
When using 11" x 17" 
copy paper, store the left 
guide in the slot at the left 
front of the paper tray.
4
Fan the copy paper.
5
Load paper in the tray.
6
Push the paper tray firmly back into 
the machine.
If you loaded a different size of paper that was loaded 
previously, place the appropriate paper size card in the 
front of the paper tray to indicate the new paper size.
Front guide
Left guide
• Load the paper with the print side facing up.
• Insert the paper along the guides.
• The tray holds up to 500 sheets of 80 
g
/m
2
  
(21 lbs.) paper.
• Do not load paper above the maximum 
height line.
• When adding paper, first remove any 
paper remaining in the tray, combine it 
with the paper to be added, and then 
reload as a single stack.
Paper size card
If you loaded a different size of paper that 
was loaded previously, go to "CHANGING A 
TRAY’S PAPER TYPE AND PAPER SIZE 
SETTINGS" (p.19).
Maximum height line
Note
Paper size card
B5
A4
A3
B5
B4
R
A4
R
8
1
/
2
X11
A5
8
1
/
2
X1 3
EXTRA
Front
Back
Note