Savin 7700W User Manual
Settings You Can Change with User Tools
43
3
• Semi-synchro Cut Original Scanning Mode(+18): Selects whether the roll
paper cut key must be pressed at the appropriate time when the trailing edge
of the original passes the Semi-synchro cut mark, or whether the original
must be inserted again after the original is scanned and the length is meas-
ured.
of the original passes the Semi-synchro cut mark, or whether the original
must be inserted again after the original is scanned and the length is meas-
ured.
Note
❒ 0: Pressing the roll paper cut key, 1: Inserting the original again
❒ Default: 0
❒ Default: 0
• Semi-synchro Cut Length Adjustment(+19): Adjust the cut length in the
semi-synchro cut mode.The setting can be changed from —25 to 25 by 1mm
steps.
steps.
Note
❒ Default: 0
• Paper Length Up/Down Setting(+20): Select if the paper length is count
down or up when the preset cut key is pressed.
Note
❒ 0: Down count, 1: Up count
❒ Default: 0
❒ Default: 0
• Paper Length Up/Down Speed Setting(+21) :The copier can scroll through
the preset lengths forward or backward, and at different speeds. There are
many sets of sizes from which to choose.
many sets of sizes from which to choose.
Note
❒ 0: 0.10 seconds, 1: 0.5 seconds, 2: 0.25 seconds, 3: 0.05 seconds, 4: 0.02 sec-
onds, 5: 0.01 seconds
❒ Default: 0
• Fixed Paper Size Pattern Setting(+22): Select the fixed paper size pattern cho-
sen when the “Preset Cut” key is press. For details about this setting, contact
your service representative.
your service representative.
• Optional Paper Size Setting(+23 ~ +32): Up to 10 different paper size can be
stored from 23 to 32.For details about this setting, contact your service repre-
sentative.
sentative.
• Auto Off Function setting(+33): This setting allows you to enable or disable
the Auto Off function.
Note
❒ 0: Disable, 1: Enable
❒ Default: 1
❒ Default: 1
• Darker Image Density(+37): Sets the range of the ID density control to give
finer control over darker images.
— ID level 1 to 7-Darker image density and low contrast settings
—ID level 8 to 14-cannot be shifted
— ID level 1 to 7-Darker image density and low contrast settings
—ID level 8 to 14-cannot be shifted