Sharp AL2021 User Manual
1
8
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.66) elapses after a job is finished, or
when the clear key is pressed twice.
The initial settings of the operation panel are shown below.
the time set with the "Auto clear time" setting (p.66) elapses after a job is finished, or
when the clear key is pressed twice.
The initial settings of the operation panel are shown below.
When copying has begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.64) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
shut-off mode (p.64) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
Copy quantity
1 copy
Exposure adjustment
AUTO
Zoom
100%
Tray
Paper tray
Two-sided copy (AL-2041 only)
The "Two-sided copy" indicator does
not illuminate. (One-sided copy is
selected.)
not illuminate. (One-sided copy is
selected.)
"0" is displayed in the display.