Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. UF-9000
  5. User Manual

Panasonic UF-9000 User Manual

Download
Page of 224
38
 Chapter 2    Basic Fax Transmission
Verification Stamp
This function confirms successful transmission or storage 
into the memory by stamping at the bottom of each 
successfully transmitted original(s) with a small “x” mark. 
z
The scanned document(s) are stamped after feeding through the ADF.
z
The standard setting of the Verification Stamp is “Off”. The stamp setting can be changed with the Function Parameter 
“04 Stamp (HOME)” (Fax/Email Settings > Fax Parameters). For instructions on how to change the standard setting, 
refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
z
The machine can be configured not to stamp the documents stored in the memory by changing the setting of 
the Function Parameter “28 Stamp at Memory XMT” (Fax/Email Settings > Fax Parameters). For instructions 
on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For 
Function Parameters) of provided CD-ROM.
z
The Verification Stamp function is available when scanning documents with the ADF.
z
Because the verification stamp cannot be deleted, be careful not to use the verification stamp when 
transmitting important document(s).
1
Place original(s) on the ADF.
z
Refer to Placing Originals (Facsimile/
Internet Fax) in the Operating Instructions 
(For Basic Operations) of provided booklet.
2
Press the Fax key.
3
Select “Basic Menu”.
4
Select “Verification Stamp”.
5
Set “Quality Adj.” as required.
z
6
Select “Address Book”, and then 
select a destination.
z
7
Press the Start key.
The original(s) are stored into memory with a 
file number. Then starts dialling the telephone 
number.
z
The setting of the “Verification Stamp” is 
returned to Off after the transmission is 
completed.
Verification Stamp
Ex: Scanning 
Direction