Sharp AL-2051 User Manual

Error 
indicator

Blinks

INSTALL A TD 
CARTRIDGE.

The TD (Toner/Developer) cartridge is 
not installed correctly. Reinstall the TD 
cartridge. 

REPLACE THE 
DRUM 
CARTRIDGE.

The drum cartridge has reached the end of 
its life. Replace it with a new drum 
cartridge. (When the indicator blinks, the 
machine does not operate.)

Steadily 
lit

TD CARTRIDGE 
IS NEAR EMPTY.

Toner is low. Purchase a new TD 
cartridge.

START 
GUIDE

A DRUM 
CARTRIDGE WILL 
BE NEEDED 
SOON.

Less than 1000 sheets can be printed 
with the current drum cartridge. 
Purchase a new drum cartridge.

MEMORY FULL, PRESS START TO 
RESUME.

Data is being held in memory. Print the 
data or clear it from memory.

NO 2-SIDED COPY FROM BYPASS 
TRAY.

Two sided printing or 2 IN 1 copying is 
selected when the bypass tray is 
already selected ,or the bypass tray is 
selected when two-sided printing or 2 
IN 1 copying is already selected.
The bypass tray cannot be used. Press 
the [TRAY SELECT] key (

) to 

select a paper tray.

28
33

NO 2IN1 COPY FROM
BYPASS TRAY.

NO 2IN1 COPY WITH MARGIN SHIFT.

2 IN 1 copy and margin shift cannot be 
used in combination.

33
36

ZOOM CAN NOT BE CHANGED IN 
2IN1.

Copy ratio can not be changed in 2 IN 1 
copy.

27
33

THIS MENU IS NOT SELECTABLE 
WITH DATA.

This appears if you attempt to change 
a user program setting while print job is 
in progress.

NO XX SIZE TRAY

There is no paper for printing. Press 
the [MODE SELECT] key to switch to 
printer mode and follow the instructions 
in the display.
("XX" indicates paper size)

-

CHECK SPF/RSPF.
START TO RESUME.

An original remains on the document 
glass, or the original is too thick to 
scan. Remove the original.

If the message is no cleared when 
there is no original on the document 
glass, the underside of the RSPF is 
dirty. Clean the underside of the RSPF 
(especially areas where black lines 
appear.)

LOAD XX PAPER INTO TRAY.

Printing is not possible if the paper size 
setting is different from the size of 
paper loaded in the tray. Load the 
same size of paper as the paper size 
setting and then press the [START] key 
(

). Printing will begin.

("XX" indicates paper size)

NO PC COMMUNICATION; CHECK 
CABLE.

The machine is not correctly connected 
to the computer. Check the cable 
(when using the scanner function).