Panasonic UF-7200 User Manual

Problem Solving

If You Have Any of These Problems

Mode

Symptom

Cause / Action

Page

During Installation

The display is
blinking

The backup capacitor is completely discharged.
After setting the clock, the blinking will stop.

During
Transmission

Document doesn’t
feed/multiple feed

1. Check that your document is free of staples and paper

clips, and that it is not greasy or torn.

2. Check that your document is the right type to send

through a fax machine. If your document has the
characteristics listed, make a photocopy of your
document and send the copy instead.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

3. Check that the document is loaded properly.
4. Adjust the ADF Pressure.

32
--

Document jam

The information code 031 will appear on the display if the
document becomes jammed.

Does not stamp

Check Fax Parameter No.04 (STAMP (HOME)) and No.28
(STAMP AT MEM. XMT) settings.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

Stamp too light

Replace stamp.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

During Reception

Recording paper jam

The Jam Error code J01, J02, J43 or J44 will appear on the
display if the paper gets jammed.

46,
47,
49,
51

Recording paper
doesn’t advance into
machine

Make sure that there is paper in the Paper Tray. Follow the
instructions for loading paper.

Recording paper
doesn’t eject after
printing

Check to see if the recording paper is jammed inside of the
machine.

46,
47,
49,
51

Recording papers
are not stacked in
sequence. Machine
does not print from
the last page
received.

1. Check if Fax Parameter No.65 (PRINT COLLATION) is

set valid.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

2. If memory becomes full during reception, the machine

will start to print from the 1st page received. We
recommend that optional SD memory card is installed if
this symptom occurs frequently.

Document auto
reduction doesn’t
work

Check Print Reduction settings.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

Out of toner

The User Error code U13 will appear on the display if the
Toner Cartridge runs out of toner.

40,
46