Panasonic KX-MB1500 User Manual

CLASS 1 LASER PRODUCT

R The printer of this unit utilizes a laser. Use of controls

or adjustments or performance of procedures other
than those specified herein may result in hazardous
radiation exposure.

Laser diode properties
Laser output : Max. 10 mW
Wavelength : 760 nm - 800 nm
Emission duration : Continuous
IEC 60825-1 : 2007

CLASS 1 LED PRODUCT

R When using the unit, do not look directly at the CIS’s

LED light. Direct eye exposure can cause eye
damage.

CIS’s LED light properties
LED radiation output : Max. 1 mW
Wavelength :

Red 630 nm typical
Green 520 nm typical
Blue 465 nm typical

Emission duration : Continuous

Fuser unit
R During or immediately after printing, the fuser unit

(A) gets hot. This is normal. Do not touch the fuser
unit.

Note:
R The area near the rear cover (B) may also get warm.

This is normal.

A

B

Toner cartridge
R When replacing the toner cartridge, do not allow dust,

water, or liquids to come in contact with it. This may
affect print quality.

R For optimal performance, genuine Panasonic toner

cartridge is recommended. We cannot be
responsible for problems that may be caused by a
non-Panasonic toner cartridge:
– Damage to the unit
– Poor print quality
– Improper operation

R Do not leave the toner cartridge out of the protective

bag for a long time. It will affect the printing quality.

R Read the instructions on page 10 before you begin

installation of the toner cartridge. After you have read
them, open the toner cartridge protective bag. The
toner cartridge contains a photosensitive drum.
Exposing it to light may damage the drum.
– Do not expose the toner cartridge to light for more

than 5 minutes.

– Do not touch or scratch the green drum surface.
– Do not place the toner cartridge near dust or dirt,

or in a high humidity area.

– Do not expose the toner cartridge to direct

sunlight.

R To extend the life of the toner cartridge, the power

should never be turned OFF immediately after
printing. Leave the power turned ON for a minimum
of 30 minutes after printing.

Location
R To avoid malfunction, do not position the unit near

appliances such as TVs or speakers which generate
an intense magnetic field.

Static electricity
R To prevent static electricity damage to the interface

connectors or other electrical components inside the
unit, touch a grounded metal surface before touching
the components.

Environment
R Keep the unit away from electrical noise generating

devices, such as fluorescent lamps and motors.

R The unit should be kept free from dust, high

temperature and vibration.

R The unit should not be exposed to direct sunlight.
R Do not place heavy objects on top of the unit. When

you leave the unit unused for a long period of time,
unplug this unit from the power outlet.

R The unit should be kept away from heat sources such

as heaters, kitchen stoves, etc. Damp basements
should also be avoided.

For assistance, please visit http://www.panasonic.com/help

3