Panasonic KX-MB1500 User Manual
6.7 Using the unit with an
answering machine
answering machine
6.7.1 Setting up the unit and an answering
machine
machine
1
Connect the answering machine (A).
R Answering machine is not supplied. The
R Answering machine is not supplied. The
illustration is just an example.
R Remove the stopper (B) if attached.
A
B
2
Set the number of rings on the answering machine to
4 rings or less.
R This will allow the answering machine to answer
4 rings or less.
R This will allow the answering machine to answer
the call first.
3
Record a greeting message on the answering
machine.
R We recommend you record a message up to 10
machine.
R We recommend you record a message up to 10
seconds long, and not to pause for more than 4
seconds during the message. Otherwise, neither
machines will function correctly.
seconds during the message. Otherwise, neither
machines will function correctly.
4
Activate the answering machine.
5
Set the unit to the desired receiving mode (page 37).
R If you set to FAX ONLY mode, change the ring
R If you set to FAX ONLY mode, change the ring
count in FAX ONLY mode to “5 EXT. TAM”
(feature #210 on page 48).
(feature #210 on page 48).
6
Make sure each of the following is unique:
– the remote access code of the answering
– the remote access code of the answering
machine
– the fax activation code (feature #434 on
– remote access to your phone company’s Voice
Mail (if you subscribed)
Note:
R If the call is a phone call, the answering machine will
R If the call is a phone call, the answering machine will
record voice messages.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
If a fax calling tone is detected, the fax machine will
receive a fax automatically.
R Regarding the remote access code for the answering
machine, see the operating instructions of the
answering machine.
answering machine.
Receiving a voice message and fax document in one
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
call
The caller can leave a voice message and send a fax
document during the same call. Inform the caller of the
following procedure beforehand.
1. The caller calls your unit.
R The answering device will answer the call.
2. The caller can leave a message after the greeting
message.
3. The caller presses MGN MBN M9N (pre-selected fax
activation code).
R The unit will activate the fax function.
R The unit will activate the fax function.
4. The caller presses the start button to send a
document.
Note:
R To use this feature, make sure remote fax activation
R To use this feature, make sure remote fax activation
is turned ON (feature #434 on page 52). The fax
activation code can also be changed.
activation code can also be changed.
R If there is no room left in the memory of your
answering machine, the unit may not be able to
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
receive documents. See the operating instructions of
the answering machine and erase unnecessary
messages.
39
6. Fax (KX-MB1520 only)