Panasonic KX-MB1500 User Manual

To indicate the unit’s status, one or more of the following messages will appear on the display.

R There is something wrong with the unit. Contact our service personnel.

R The toner cartridge is not inserted properly. Re-insert it correctly (page 10).
R There is something wrong with the toner cartridge. Replace the toner

cartridge.

R The toner cartridge is not inserted properly. Re-insert it correctly (page 10).

R Recording paper is not installed or the paper input tray has run out of paper.

R Recording paper was not fed into the unit properly. Re-insert the recording

R The paper input tray is not installed or is not inserted completely. Insert the

paper input tray into the unit.

R The loaded recording paper is not the appropriate size. Load recording

paper of the size that is shown on the display.

R If this message is often displayed, also change the recording paper size

R The recording paper size setting (feature #380 on page 48) is set to

“16K”, so received faxes have been stored into memory. Change the
recording paper size setting and load the appropriate recording paper.

Note:
R “#1”: Check the paper input tray. The displayed paper size depends on the

R “#2”: Check the manual input tray. The displayed paper size depends on

the recording paper size setting (feature #381 on page 48).

R Recording paper was not fed into the unit properly. Load the paper again

R The unit is cooling down the fuser unit. Wait for a while.

R The drum inside the toner cartridge is reaching the end of its life. Replace

the toner cartridge as soon as possible.

R The drum inside the toner cartridge has finished its service life. Replace the

toner cartridge immediately.

Note:
R As a temporary measure, you can press MStartN to continue printing.

However, the printing quality may be poor, so we do not recommend
continuous use of the finished cartridge.

R The unit has a document in memory. See the other displayed message

instructions to print out the document. For fax memory capacity, see
page 73.

R If the PC fax setting (feature #442 on page 53) is set to “ALWAYS”,

– check the connection between the computer and the unit.
– check that the computer is turned ON.

R The front cover is open. Close it.

R Copying has stopped due to some existing problem (Example: a lack of

recording paper or a recording paper jam). See the other displayed message
instructions to continue copying.

R The inside of the unit is extremely cold and cannot be operated. Use the unit

in a warmer area.

60

For assistance, please visit http://www.panasonic.com/help