Panasonic KX-MB2000 User Manual

We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.

MFNMEN

MSetN

MMenuN

MFaxN

* The pictured model is KX-MB2030.

MMenuN A MBNM1NM0NM1N A MSetN

Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2010
M0NM8N M0NM3N M1NM0N

Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. M1NM0N M1NM5N
2. Press MGN repeatedly to select “PM”.

MSetN

Press MMenuN to exit.

Note:
R To check the current date and time setting, press

MFaxN to temporarily change the unit to the fax mode
(KX-MB2030 only).

R Your unit’s date and time will be used as the header

information for the following:
– When sending as an attached file to an email

destination directly from this unit (Scan to email
address) (page 31).

– When sending faxes (page 41) (KX-MB2030

only).

R If the date and time is not set correctly, the other party

will receive an incorrect date and time as their
header. This may confuse the other party.

To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.

If you have subscribed to a Caller ID service
(KX-MB2030 only)
The date and time will be automatically set according to
the received caller information.
R If the time has not previously been set, Caller ID will

not adjust the clock.

R You can turn this feature OFF (feature #226 on

You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.

MFNMEN

MSetN

MStopN

MMenuN

MMenuN A MBNM1NM0NM2N A MSetN

Enter your logo, up to 30 characters (see page 71
for character entry). A MSetN

Press MMenuN to exit.

To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
character, and make the correction.
R To erase all characters, press and hold MStopN.

22

For assistance, please visit http://www.panasonic.com/help