Panasonic KX-MB2000 User Manual

R A4 or letter size recording paper can be used.
R Use this mode with an extension telephone.

Press MFax Auto AnswerN repeatedly to display “TEL
MODE”.
R The MFax Auto AnswerN light turns OFF.

Note:
R If you do not answer the call within 10 rings, the unit

will temporarily switch to fax reception. The other
party can then send a fax.

How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset

of the extension telephone.

2. When:

– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press MGN MBN M9N (default fax activation code)
firmly.

3. Replace the handset.

Note:
R To stop receiving, see page 72.
R To receive fax documents using the extension

telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.

Connect the answering machine (A).
R Answering machine is not supplied.
R Remove the stopper (B) if attached.

A

B

Set the number of rings on the answering machine to
4 rings or less.
R This will allow the answering machine to answer

the call first.

Record a greeting message on the answering
machine.
R We recommend you record a message up to 10

seconds long, and not to pause for more than 4
seconds during the message. Otherwise, neither
machines will function correctly.

Activate the answering machine.

Set the unit to the desired receiving mode (page 46).
R If you set to FAX ONLY mode, change the ring

Make sure each of the following is unique:
– the remote access code of the answering

machine

– the fax activation code (feature #434 on

47