Panasonic KX-MB2000 User Manual

To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the
confirmation and journal reports (page 41).

40-42
46-72

FF

R A transmission or reception error occurred. Try

again or check with the other party.

43
44

R A line problem occurred. Connect the telephone line

cord to a different jack and try again.

R An overseas transmission error occurred. Try using

the overseas mode (feature #411 on page 59).

-----

R Remove the jammed document (page 90).

53
54
59
70

R A transmission or reception error occurred because

of a problem with the other party’s fax machine.
Check with the other party.

-----

R The junk fax prohibitor feature of this unit rejected

fax reception.

-----

R The memory is full of received documents due to a

lack of recording paper or a recording paper jam.
Load paper (page 14) or remove the jammed paper
(page 85).

R If the PC fax setting (feature #442 on page 62) is set

to “ALWAYS”, check the connection between the
computer and the unit.

R If your unit is connected to the computer via the LAN

and the fax preview mode (feature #448 on
page 50) is set to “ON”, view, print or save the
documents on the web browser, and then erase
unnecessary documents (page 50).

-----

R The document was not fed into the unit properly.

Re-insert it and try again.

-----

R The other party’s fax machine is busy or has run out

of recording paper. Try again.

R The other party’s fax machine rings too many times.

R The other party’s machine is not a fax machine.

Check with the other party.

R The number you dialed is not in service.

-----

R MStopN was pressed and fax communication was

canceled.

-----

R The top cover was opened. Close it and try again.

-----

R Fax transmission or reception was successful.

For assistance, please visit http://www.panasonic.com/help

73

11. . Help