Panasonic DP-C323 / C263 / C213 User Manual

64

●

When a user error occurs, the location and the procedures for handling
the user error are displayed frame by frame on the Touch Panel Display.
Check the location and handle the user error according to displayed
pictures and this manual. (See pages 78-83)

Ex: Front Cover is

opened.

Ex: Toner Waste Container

is almost full.

Ex: Toner Waste

Container is full.

U1

Front Cover is open.

U4

Finisher is pulled out.

U6

ADU Cover and/or Feed Cover 1 and/or Right
Side Cover is open.

U7

Feed Cover 2 & Option Feed Cover are open.

U8

Transport Cover is open.
(When optional Paper Transport Unit is
installed)

U11

Paper remains in the Finisher Bin.
(When optional Finisher is installed)

U12

Finisher Top Cover and/or Staple Cover is
open.
(When optional Finisher is installed)

U13*

Toner level is Low, or has run out.
(See pages 16, 78, and 79)

U14*

Toner Waste Container is full.
(See pages 16, 82, and 83)

U15

Toner Waste Container is not installed.
(See pages 82 and 83)

U20

ADF Cover is open.

U21

ADF is open while scanning from ADF.

U25

Toner is hardened. Shake Toner Cartridge
well. (See page 78)

U28

OPC Drum Unit is not installed.
(See pages 80 and 81)

U29

OPC Drum Unit requires replacement.
(See pages 80 and 81)

NOTE*
A. Blinking Maintenance and Toner/Toner Waste Container Indicators

The machine will complete the current job and stop operating. To continue using the machine temporarily while waiting for a
replacement toner/container, press any key. (Ex: For Toner Waste Container, approximately 300 additional copies can be made)

B. Light up Maintenance and Toner/Toner Waste Container Indicators

The machine stops and will not allow further operation until the Toner Waste Container is replaced.

●

Select “Close” to
continue the current
job temporarily.

●

Machine will stop.
Replace the Toner
Waste Container.

E Codes:
Call the authorized Panasonic dealer when
machine Error Code (E Code) appears on the
Touch Panel Display.