Panasonic KX-FPG376 User Manual
6. Copy
49
6 Copy
Copying
6.1 Making a copy
1
Adjust the width of the document guides (
1)
to fit the actual size of the document.
2
Insert the document (up to 10 pages) FACE
DOWN (
DOWN (
2) until a single beep is heard and
the unit grasps the document.
L
If the document guides are not adjusted
to fit the document, re-adjust them.
to fit the document, re-adjust them.
3
If necessary, press {A} or {B} repeatedly to
select the desired resolution.
select the desired resolution.
4
Press {COPY}.
L
If necessary, enter the number of copies
(up to 30).
(up to 30).
5
Press {START}.
L
The unit will start copying.
L
If you do not press {START} for about 15
seconds, the unit will start copying
automatically.
seconds, the unit will start copying
automatically.
Note:
L
Any transmittable document can be copied
(page 41).
(page 41).
To select the resolution
Select the desired resolution according to the
type of document.
–
type of document.
–
“FINE”: For printed or typewritten originals
with small printing.
with small printing.
–
“SUPER FINE”: For originals with very small
printing.
printing.
–
“PHOTO”: For originals containing
photographs, shaded drawings, etc.
photographs, shaded drawings, etc.
L
If you select “STANDARD”, copying will be
done using “FINE” mode.
done using “FINE” mode.
Quick scan feature
This feature is helpful when you want to copy a
document, but do not want to wait for the unit to
print the copy because you need the document
for other uses. The unit can scan a document
into memory, release the original document, then
print the copy. To use this feature, activate
feature #34 (page 62).
document, but do not want to wait for the unit to
print the copy because you need the document
for other uses. The unit can scan a document
into memory, release the original document, then
print the copy. To use this feature, activate
feature #34 (page 62).
L
The document will be fed into the unit and
scanned into memory. The unit will then print
the data.
If the document exceeds the memory
capacity, copying of the exceeded document
will be canceled and this feature will be
turned OFF automatically.
scanned into memory. The unit will then print
the data.
If the document exceeds the memory
capacity, copying of the exceeded document
will be canceled and this feature will be
turned OFF automatically.
To stop copying
Press {STOP}.
6.1.1 More copying features
To enlarge a document
1. Press {>} after step 4 on page 49.
2. Press {A} repeatedly to select “150%” or
“200%”.
3. Press {START}.
L
The unit will enlarge the center of the
upper part of the document. To make an
enlarged copy of the bottom of the
document, turn the document around,
and then make a copy.
upper part of the document. To make an
enlarged copy of the bottom of the
document, turn the document around,
and then make a copy.
To reduce a document
1. Press {>} after step 4 on page 49.
2. Press {B} repeatedly to select “92%”, “86%”
or “72%”.
3. Press {START}.
1
2
{
STOP}
{
START}
{
SET}
{>}{A}{B}
{
COPY}
Example: 150% enlarged copy
A
B
C
D
A
B
C
D
Original document
Enlarged copy
FPG376.book Page 49 Wednesday, July 30, 2003 6:28 PM