Panasonic KX-PS8000 User Manual
114
Trouble
ADF doesn’t feed
document.
document.
Corrective Action
Condensation has
occurred.
occurred.
Use a recommended
SCSI-2 board
SCSI-2 board
Consult the Utilities and
Drivers Reference
manual.
Drivers Reference
manual.
Unlock the scanner
Care and Maintenance
Troubleshooting
Scanner
Possible Cause
Connect the AC cord.
Connect the SCSI cable
Set the SCSI ID No.
correctly
correctly
Install the software
Clean the document.
Clean the scanner glass.
Reposition the document
correctly according to the
size.
correctly according to the
size.
Set the document evenly.
Scan the document by
placing it on the scanner
glass.
placing it on the scanner
glass.
The height of document
should not exceed the
limit mark on the
document guide.
should not exceed the
limit mark on the
document guide.
AC cord is not
connected.
connected.
Scanner is locked.
SCSI cable is not
properly connected.
properly connected.
SCSI ID No. is not set
correctly.
correctly.
SCSI-2 board is not
compatible.
compatible.
Software may not be
installed.
installed.
Original document is dirty.
Scanner glass is dirty.
Document is not
positioned correctly.
positioned correctly.
Document is not evenly
set on the scanner glass.
set on the scanner glass.
You may not be using the
software utility correctly.
software utility correctly.
Document thickness is
out of specifications.
out of specifications.
Too many documents are
inserted in the ADF tray.
inserted in the ADF tray.
Scanner does not turn
on.
on.
Scanning operation can-
not be performed.
not be performed.
Scanned image is dirty.
One or both ends of
image is/are not
scanned.
image is/are not
scanned.
Scanned image is blurred
or partially colored.
or partially colored.
Scan quality is bad.
Leave the unit for 4 or 5
hours.
hours.
ABCD - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - -
Scanner Error 49 is
displayed on LCD when
powered on.
displayed on LCD when
powered on.