Panasonic KX-PS8000 User Manual
45
Setup
Make sure the SCSI ID No. of the scanner is 2 and that of the
printer is 1. (They are the default settings.)
printer is 1. (They are the default settings.)
B
If you have other devices connected to the computer, make sure that each
SCSI device has a different ID No.
SCSI device has a different ID No.
B
To change an ID No., use ID No. switches (#1, #2, #3) located on the back
of the units. Also refer to Table 1 on
of the units. Also refer to Table 1 on
Make sure the terminator switch (#4) of the scanner is set to OFF
and that of the printer is set to ON. (They are the default settings.)
and that of the printer is set to ON. (They are the default settings.)
B
If you have other devices connected to the computer, make sure the
terminator switches of all those devices are set to OFF.
terminator switches of all those devices are set to OFF.
B
To change the terminator setting, use the terminator switch (#4) located on
the back of the units.
the back of the units.
Connect the power cords to the scanner’s AC inlet, to the
printer’s AC inlet and to AC outlets.
printer’s AC inlet and to AC outlets.
4
5
6
1
2
3
4
ON
12
3
4
ON
Scanner
Printer