Panasonic KX-MB2025FX User Manual
6.1 Sending a fax manually
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper.
booklets or small size paper.
MResolutionN
MContrastN
MRedialN
MFaxN
MStartN
MSetN
MQuick ScanN
1
If the MFaxN light is OFF, turn it ON by pressing
MFaxN.
MFaxN.
2
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 42.
R To select the contrast, see page 42.
according to the type of document.
R To select the resolution, see page 42.
R To select the contrast, see page 42.
4
Dial the fax number.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
5
Press MQuick ScanN to scan the document into
memory.
R Wait until “SCAN:PRESS SET” “SEND:PRESS
memory.
R Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
6
Place the next page on the scanner glass. A MSetN
R To send more pages, repeat this step.
R To send more pages, repeat this step.
7
MStartN
Note:
R To stop sending, see page 77.
R You can change the default operation mode (feature
R To stop sending, see page 77.
R You can change the default operation mode (feature
#463 on page 61) and the timer before returning to
the default operation mode (feature #464 on
page 61).
the default operation mode (feature #464 on
page 61).
To select the resolution
1. Press MResolutionN repeatedly.
1. Press MResolutionN repeatedly.
– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,
etc.
2. MSetN
R Using the “FINE”, “SUPER FINE” and “PHOTO”
R Using the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Note:
R You can save the previous contrast setting (feature
R You can save the previous contrast setting (feature
To redial the last number
MRedialN
R If the line is busy, the unit will automatically redial the
MRedialN
R If the line is busy, the unit will automatically redial the
number 2 or more times.
Note:
R To stop sending, see page 77.
R To stop sending, see page 77.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad,
one-touch dial or phonebook.
3. When using the scanner glass, press MQuick
ScanN. The unit will scan 1 page. Place the next
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder,
press MStartN.
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder,
press MStartN.
R If the document exceeds the memory capacity, the
reservation for that document will be cancelled. You
must send the entire document manually.
must send the entire document manually.
Printing a sending report
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 62). For an
explanation of the messages, see page 80.
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 62). For an
explanation of the messages, see page 80.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 103. To print it automatically after every 30 new
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 103. To print it automatically after every 30 new
42
6. . Fax (KX-MB2025/KX-MB2030 only)
6. Fax (KX-MB2025/KX-MB2030 only)