OKI MC160n User Manual
154
Replacing Consumables
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner spills,
immediately wipe it off with a soft, dry cloth.
immediately wipe it off with a soft, dry cloth.
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to ON or
ON(FAX), the message TONER OUT/CHANGE X TONER (where “X” indicates
the color of the toner) appears when the toner cartridge is nearly empty. Follow
the steps below to replace the toner cartridge.
ON(FAX), the message TONER OUT/CHANGE X TONER (where “X” indicates
the color of the toner) appears when the toner cartridge is nearly empty. Follow
the steps below to replace the toner cartridge.
1
Check the message window to see which color toner cartridge needs replac-
ing.
ing.
"
If the machine detects that a toner cartridge is empty (TONER OUT or
TONER LIFE END appears), the empty toner cartridge is automati-
cally moved so that it can be replaced.
If this has occurred, skip steps 2 through 5, and continue with step 6.
TONER LIFE END appears), the empty toner cartridge is automati-
cally moved so that it can be replaced.
If this has occurred, skip steps 2 through 5, and continue with step 6.
"
If MACHINE SETTING/TONER OUT STOP in the UTILITY menu is set to
OFF, printing can continue even after the message “Toner Out X” has
appeared; however, the printing quality cannot be guaranteed. If printing
is continued and the toner becomes empty, the message “TONER LIFE
END/CHANGE X TONER” appears and printing stops. For details on the
setting, refer to “MACHINE SETTING Menu” on page 41.
OFF, printing can continue even after the message “Toner Out X” has
appeared; however, the printing quality cannot be guaranteed. If printing
is continued and the toner becomes empty, the message “TONER LIFE
END/CHANGE X TONER” appears and printing stops. For details on the
setting, refer to “MACHINE SETTING Menu” on page 41.
2
With the main screen displayed, press the key to display the PRINTER
MODE screen.
MODE screen.
3
Press the key to select T/C CHANGE and then press the Enter key.
4
Press the Enter key to select REPLACE MODE.
5
Press v to select the color for the toner cartridge to be replaced, and then
press the Enter key.
The toner cartridges rotate within the machine to move the toner cartridge of
the selected color to a position where it can be replaced.
press the Enter key.
The toner cartridges rotate within the machine to move the toner cartridge of
the selected color to a position where it can be replaced.
"
To exit REPLACE MODE, press the Stop/Reset key.