OKI MC160n User Manual

Printing 
takes too 
much time.

The machine is set to 
a slow printing mode 
(for example, thick 
stock).

It takes more time to print with special 
media. When using regular paper, 
make sure that the media type is set 
properly in the driver.

The machine is set to 
power saving mode.

It takes time for printing to start in 
power saving mode.

The job is very com-
plex.

Wait. No action needed.

A toner cartridge for a 
different region or an 
unapproved toner 
cartridge is installed 
(Wrong Toner X is 
displayed in the mes-
sage window).

Install a correct Oki toner cartridge 
approved for your specific machine.

If an error has been 
detected during print-
ing job transmission 
in the Copy mode, it 
takes a while to pro-
cess the error and 
resume the printing 
operation.

Wait. No action needed.

Blank pages 
are printed.

One or more of the 
toner cartridges are 
defective or empty.

Check the toner cartridges. The image 
will not print correctly or not at all, if the 
cartridges are empty.

The wrong media is 
being used.

Check that the media type set in the 
driver matches the media loaded in the 
machine.

Not all pages 
print.

A different user acci-
dentally canceled the 
job.

Try printing the remaining pages.

The tray is empty.

Check that the tray is loaded with 
media, in place, and secure.

A document is printed 
with an overlay file 
which has been cre-
ated by an unsuit-
able printer driver.

Print the overlay file using a suitable 
printer driver.