Panasonic KX-MB3010 User Manual
6. Fax (KX-MB3020 only)
47
6.7 Receiving a fax manually –
Auto answer OFF
Auto answer OFF
Important:
L
Use this mode with an extension telephone.
6.7.1 Activating TEL mode
Set the unit to TEL mode by pressing {Fax Auto
Answer} repeatedly to display “
Answer} repeatedly to display “
TEL MODE”.
L
The {Fax Auto Answer} light turns OFF.
Note:
L
If you do not answer the call within 10 rings, the unit
will temporarily switch to fax reception. The other
party can then send a fax.
will temporarily switch to fax reception. The other
party can then send a fax.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press {*} {#} {9} (default fax activation code)
firmly.
firmly.
3. Replace the handset.
Note:
L
To stop receiving, see page 73.
L
To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.
telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.
6.8 Using the unit with an
answering machine
answering machine
6.8.1 Setting up the unit and an answering
machine
machine
1
Connect the answering machine (
1).
L
An answering machine is not supplied.
L
Remove the stopper (
2) if attached.
2
Set the number of rings on the answering machine to
4 rings or less.
4 rings or less.
L
This will allow the answering machine to answer
the call first.
the call first.
3
Record a greeting message on the answering
machine.
machine.
L
We recommend you record a message that is
under 10 seconds long, and not to pause for
more than 4 seconds during the message.
Otherwise, both machines will not function
correctly.
under 10 seconds long, and not to pause for
more than 4 seconds during the message.
Otherwise, both machines will not function
correctly.
4
Activate the answering machine.
5
Set the unit to the desired receiving mode (page 46).
L
If you set it to FAX ONLY mode, change the ring
setting in FAX ONLY mode to “
setting in FAX ONLY mode to “
5 EXT. TAM”
(feature #210 on page 56).
6
Make sure each of the following are unique:
–
–
the remote access code of the answering
machine
machine
–
the fax activation code (feature #434 on page 61)
–
remote access to your phone company’s Voice
Mail (if you subscribed)
Mail (if you subscribed)
1
2