Panasonic KX-MB2025EX User Manual

* The pictured model is KX-MB2010.

Insert the document (up to 20 pages) FACE UP into
the feeder until a single beep is heard.

Adjust the width of the document guides (A) to fit the
actual size of the document.

Note:
R Confirm that there are no documents on the scanner

glass.

R Confirm that any ink, paste or correction fluid has

dried completely.

R Remove clips, staples or other fasteners.
R Do not insert the following types of documents (Make

a copy of the document using the scanner glass and
set the copy instead.):
– Chemically treated paper such as carbon or

carbonless duplicating paper

– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with printing on the opposite side that can

be seen through the other side, such as newsprint

R The total height of the documents when laid flat, must

be less than 4 mm. If the documents exceed the
capacity of the automatic document feeder, they may
fall or cause a jam in the feeder.

R To set a document with a width of less than 210 mm,

we recommend using the scanner glass to copy the
original document onto A4 or letter-size paper, then
setting the copied document for better results.

R Do not set documents that do not satisfy the

requirements of size and weight. Make a copy of the
document using the scanner glass and set the copy.

R Available document size, document weight and

effective scanning area are as follows:

128 mm

128 mm

600 mm 

216 mm

216 mm

208 mm

 4 mm

 4 mm

 4 mm

 4 mm

R Shaded area will be scanned.
R When using the unit as a scanner (page 31,

34), the effective scanning length depends on
the selected paper size.

Document weight
R Single sheet:

60 g/m

2

 to 80 g/m

2

R Multiple sheets:

60 g/m

2

 to 80 g/m

2

20